Main unit：Barricade plate and two legs

Accessories: Four screws

How to assemble

① Align the screw holes on the back of the barricade plate with the legs. *The unprinted side is the back.

<aside> ⚠️ There are two drainage holes on the bottom left and right of the barricade plate.

*Ensure the drainage holes on the plate are facing downwards before attaching the legs.

</aside>

Assemble the plate so it rests on the L-shaped parts of the legs.

Place the back of the barricade plate (with the screw holes) over the L-shaped parts.

② Secure the barricade plate to the legs with four screws. For easier installation, place the barricade plate on the base and secure the leg parts in place before proceeding.

*When using acrylic plates, please be careful not to overtighten the screws, as this may cause cracking. We recommend tightening the screws gently by hand and avoiding the use of power drivers.

Secure each leg at two points, top and bottom.

Confirm the drainage holes are correctly oriented.

When installing the acrylic plate, we recommend using a manual screwdriver instead of an electric screwdriver.

Acrylic plate allows screws to show through the surface

③ Complete.

The legs have non-slip features.