Body: Seat, 2 bars, 2 legs, 2 hooks, logo plate

Accessories: short bolt x 8, long bolt x 4, washer/spring washer/nut x 8 Hexagonal wrench (Ⅿ6/Ⅿ8) x 1, Wrench x 1

*Two types of hexagonal wrenches are included due to different screw diameters.

From left to right: Ⅿ6 hexagonal wrench, Ⅿ8 hexagonal wrench

How to install

①Overlap the seat and legs, insert short bolts from the outside of the mounting holes, and install washers, spring washers, and nuts in that order, temporarily fastening a total of 8 places.

*Fix the bar completely after installation because it may be difficult to insert the bar.

Install the washers in this order: ① washer, ② spring washer, ③ nut.

Temporarily fasten all 8 locations.

②Insert long bolts into the mounting holes on the sides of the legs and secure the bar in 4 places using a Ⅿ6 hex wrench.

Use a Ⅿ6 hex wrench.

Secure the bar with long bolts in 4 places.

③Stand the steel or bench and fix the seat and legs temporarily fastened in ① in 8 places using a Ⅿ8 hex wrench and a wrench.