Sign kit : Steel Cover, Steel Base

Accessories : 2 screws, 4 magnets

Precautions before installation

<aside> ⚠️

We recommend professional installation, considering the wall material and location.

(For purchasers)

• To ensure safe use, we recommend periodic maintenance and inspection by the installer at least once a year. With long-term use, deterioration and loosening of bolts and screws may occur over time. If any defects are found, please repair or replace parts.

(For installers)

• Please install it where there is a base.
• If you have a plasterboard wall, make sure to attach it to the base behind the wall.
• For concrete, drill pilot holes and use concrete plugs to install.
• The safe load varies depending on the wall material. Please use an installation method that ensures sufficient strength.
• Please select screws, plugs, etc. according to the wall condition and install them based on the judgment of professionals regarding the safety of the installation location. </aside>

How to install

① Measure the horizontal and then drive two screws into the solid wall.

※ Please align the screws with the hole positions on the back side of the steel base (hole spacing: 250mm)

※ Please drive the screws into the wall leaving about 2-3mm exposed.

② Attach the holes on the backside of the steel base onto the screws.

③ Inside the steel base attach the paper you want to display using magnets.