Accessories: Hanger rail set (2 rails, 2 transparent cushions)

① 2 long screws / 2 short screws

② Strong adhesive double-sided tape/adhesive 2 pieces

Please attach using either ① or ② depending on the material of the plate and the installation location.

How to install

1.Determine the position and attach the hanger rail horizontally to the wall.

① If it can be installed on the wall using screws (2 long screws to the wall side)

<aside> ⚠️ When installing on an exterior wall, we recommend that a professional install the product, taking into consideration the material of the exterior wall, where to drill holes, and waterproofing.

(For installers)

• Please install on a wall with a base.
• If you have a plasterboard wall, make sure to attach it to the base behind the wall.
• For concrete, drill pilot holes and use concrete plugs to install.
• The safe load varies depending on the wall material. Please use an installation method that ensures sufficient strength.
• Please select screws, plugs, etc. according to the wall condition and install them based on the judgment of professionals regarding the safety of the installation location. </aside>

② If installation is not possible with screws on the wall (double-sided tape + adhesive)

「Wall surfaces that cannot be fixed with double-sided tape + adhesive:

• Wall surfaces where paint easily peels off
• Wall surfaces that are easily damaged such as wallpaper
• uneven wall surface
• Walls made of materials that are difficult to adhere to, such as rubber, polypropylene, polyethylene, and vinyl chloride.
• Concrete wall (double-sided tape may soften and peel due to the ingredients contained in concrete)

2. Attach the hanger rail to the back of the sign plate.

① When fixing with screws (only for wood plates)

*When attaching the rail to the wood plate with short screws, insert the included washers in between.

The FLAT PLATE L-SIZE set does not require a washer, so it is not included.

② When fixing with double-sided tape + adhesive (metal plate (wood plate is also acceptable))

*Wipe off oil, moisture, dirt, etc. from the surface to be pasted and let it dry.

*The double-sided tape is pressure-sensitive. Attach the hanger rail and apply sufficient pressure from above.

*The initial adhesive strength of the tape will be lower in low-temperature environments. (15°C ~ recommended)

*It takes about 1 day for the tape to reach its maximum adhesive strength. Let it sit for 24 hours before hanging it on the wall.

3. Attach the included transparent cushion to the back of the sign plate.

Paste it on the bottom of the plate, on the left and right sides.