Accessories: 2 thick double-sided tape, 2 thin double-sided tape, 1 tube of adhesive, 2 transparent anti-slip stickers

*The length of the double-sided tape varies depending on the size of the L PARTS sign.

How to install

①Attach the anti-slip transparent stickers or double-sided tape on the inside of L PARTS on both ends.

• Instructions for when the block is not fixed, such as a double-side printed block.

*The transparent anti-slip sticker is used to prevent (reduce) the BLOCK from shifting sideways.

• Instructions for when the block is fixed into place such as a single-sided printed block.

  *Please use thin double-sided tape.

  • We recommend affixing the block if there is a possibility of people touching or a risk of the block falling.

  

<aside> ⚠️ For materials like concrete or stone, which tend to be powdery, or in cases where dust and dirt may weaken the adhesive effect of the seals.

Please wipe off any dirt with a damp cloth and allowing it to dry before using the double-sided tape.

Materials that are difficult to produce the effects of “transparent stickers” and “double-sided stickers”:

• Uneven or rough materials
• Concrete and stone </aside>

②Attach 2 pieces of double-sided tape to the back of L PARTS and affix it to the wall.

*If you are concerned about the weight of BLOCK, you can attach adhesive to L PARTS and affix it to the wall.

• If affixing with double-sided tape.

   * Please use thick double-sided tape.