body：4 parts of stand (menu plate, acrylic plate, base, bar)

accessory：Long screw x 1, short screw x 1, Ⅿ6/Ⅿ8 hex wrench x 1

*Two types of hexagonal wrenches are included due to different screw diameters.

From left to right: Ⅿ6 hex wrench, long screw, Ⅿ8 hex wrench, short screw

How to install

①Attach the stand base and bar using short screws and a Ⅿ8 hex wrench.

Align the base with the projection of the bar.

Screws must go through the bottom of the stand base

When installing the screws, make sure that the screws fit into the hollowed surface of the plate.

Tighten firmly with a Ⅿ8 hex wrench.

②Set up the stand and attach the menu plate and bar using long screws and a Ⅿ6 hex wrench.

Align the back of the plate with the unevenness of the top of the bar and connect.

Thread the long screw through the top of the plate.

Match the unevenness exactly.

Tighten firmly with a Ⅿ6 hex wrench.

③Set the menu and insert the acrylic plate on top.

*For outdoor installation, we recommend laminating the menu.

④Complete.