**Main unit：**Block x 1, Printing plate x 1

**Accessories：**double-sided tape x 2 pcs.

How to assemble

①Attach the double-sided tape vertically to the back of the nameplate.

②Wipe the surface of the block on which the plate is to be installed with water, wipe off any powderiness or dirt, and allow to dry.

Then peel off the release paper from the double-sided tape and crimp the plate onto the block for 30 seconds to fix it in place.

<aside> ⚠️ precautions

• In the case of powdery materials such as concrete, dust and dirt may reduce the effectiveness of the seal. Please wipe off any dirt with water, etc. and be sure to dry before use. </aside>

Overlap and secure the plate to the block.

Crimp the plate hard for 30 seconds

③Completion